- HOME
- PRODUCTS
- CORTEC
- ATW
- TESTEX
- PHASE II+
- PHYNIX
- K-2
- QUIKSET
- PRESTON
- ELECTRICAL
- FIREBRAND
- SERVICES
- TRAINING COURSES
- RENTAL
- Komplek Nagoya
Paradise Center
Blok O No. 11
Batam Island - Tel: +62 778 459657
Fax: +62 778 459652 - sales@adventniaga.com
Ultrasonic Thickness Gauge
With A & B Scan and Through
Coating Capability
Model No. UTG-2600
State of the art, digital ultrasonic thickness gauge is capable of reading wall thickness thru coatings and paint without affecting the measurement and is packed with the most popular features including basic measurement, Scanning Capabilities, Adjustable Sound Velocity, and extended memory capabilities. This dynamic ultrasonic thickness gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2600 ultrasonic thickness gauge will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity.
Technical Specifications
| Display type | 4-digit LCD w/Back Light |
|---|---|
| Minimum display unit | 0.003 (if>3.93”) 0.0003” (if<3.93”) |
| Measuring Range | Standard Mode: 0.040" to 12" in steel Thru Coating Mode: 0.118” - .905” 3.0 -23mm) w/standard probe |
| Accuracy | +/- 1%xH + 0.0007” (H=displayed value) |
| Sound velocity range | 3280-32805 ft/s (1000-9999m/s) |
| Upper/Lower Limit Preset Alarm | Yes |
| Operating temperature | 32-122 degrees F |
| Frequency | 4MHz |
| Update range | 4Hz |
| Memory | 500 Test Values |
| Mini-Printer | Optional |
| Power supply | 3v AA alkaline batteries (2pc) |
| Battery life | Approx. 100 hours (w/backlight off) |
| Power consumption | Working current is less than 3V |
| Dimensions | 5.86” x 2.87” x 1.25” (149 x 73 x 32mm) |
| Weight | 5.6oz (160g) |